Transparent Back and Side Back Cover Skin for Iphone
Available only for
Iphone 6, 6s, 6+, 6s+
1. Back and Side Cover Skin
2. Cleaning set: alcohol pad, cleaning pad, dust cleaning sticker, cleaning cloth, bubble removing card, anti-slip pad
How to install transparent back & side cover skin for iPhone 6/6+
After you install, you can use hair dryer to make back cover skin softer and sticker, especially if you stick it lopsided then you must use hair dryer or its edge would be sharp.
5:50 - Install straight line back & side cover skin on grey phone
9:40 - Use hair dryer to heat back & side cover skin
13:30 - Install cross line back & side cover skin on gold phone
16:40 - Install matte back & side cover skin on silver phone
18:30 - three kinds of back & side color skins on three phones
This product suits if you don't use any kind of bumper case. It adds more friction when you grab your phone. It just feels good to hold it in hand.
If you will use bumper case, we would suggest to use the skin that doesn't cover the side of phone to avoid having problems on using the bumper's buttons.
1. Put phone on anti-slip pad.
2. Clean the rear of phone with alcohol pad and dry all the fluid with dry cleaning pad.
3. Peel off based layer to the bottom edge of lens.
4. Using enough force, swipe the back & side cover skin from the bottom edge of lens to the end at once directly. Don't hesitate, or else bubble will remain in it.
5. Use hair dryer to heat back & side cover skin and rub it. It makes the skin stick on phone.
6. If there's bubble inside, heat it with hair dryer and press it from the back of phone to the edge. Pressing in this direction is important.
We Also Recommend